brent Solus does not have the current Rufus

On Solus I use Etcher to burn USB drives. In fact, I did it twice today. It's never failed me, and it's incredibly easy to use.

On Windows, Rufus is fine. There's a Windows version of Etcher, too, but I still use Rufus out of habit.

    🙂 Etcher comes highly recommended; I use it a lot to burn OS images on my flash drive.

    What you can do is download a fresh image of Solus GNOME and use Etcher to put it together.

    Try installing Solus GNOME in the legacy mode in the bios.

    And, do your first update via the terminal using the command: sudo eopkg up

    There are times when the GUI version of the software updater ruin things.

    Please keep us (the Solus forum members) updated on your progress.

      [deleted] Have tried download the budgie version which have not also succeeded in doing so(same error as the gnome version) tried two different usb sticks. 16 and 32gb

        brent. Have tried different ones. Rufus was the most success i have ever got but still to no avail could not get it properly booted. Have tried different settings like dd image and iso image. Different settings too like quick format and other stuff still no success. Have tried budge version and gnome version theyre both showing errors

          Renard I am going to use etcher again and am going to pray for it to work. As for the terminal thing. Where can i do it? From the windoes command prompt or powershell? Or grub? Sorry i am a complete novice when it comes to linux and computers so my questions are really stupid

              What exactly is the error with acpi? Copy it and paste it here. Please provide the specification of your laptop inxi -F

                Forgive me if I am slightly on the wrong track here; but I have heard that some machines can boot with acpi switched off so maybe this is an option. I remember reading a Red Hat Linux article about some hardware shipping with buggy acpi firmware. A quick search; and I have found said article maybe it would help in this situation? I am no expert but often find many solutions to these sorts of problems scattered across the forums of Solus and other OS's.
                https://access.redhat.com/solutions/58790

                pomon Its a lenovo g40-80 intel i5-5200U 6gb ram 2.20ghz and hdd. The error was acpi bios error(bug)could not resolve symbol

                  Well, according to the link provided by @DJSupertel when starting Live Solus, press Tab and add acpi=off at the end of the line. If that doesn't work, you can try adding noapic or nolapic, or all of them.

                    pomon tried doing all of them.
                    Acpi=off brings me to a black screen.
                    Noapic brings me to my error again thus nothing happened.
                    Nolapic brings me to an error but its like a shorter error. There was no failed to mount /sysroot and no emergency mode. Im starting to think its my laptop's problem. Have already tried ubuntu and two solus os versions and still nothing

                      You can check it out yet acpi_osi=! acpi_osi="Windows 2009". I asked you to provide a specification. What is your graphics card because the black screen is usually a problem with the graphics card drivers. You may need to add a parameter from modeset.

                      Options: acpi_osi=! acpi_osi="Windows 2015" or acpi=off nomodeset

                        Updating the BIOS can also cure this problem if the BIOS shipped had buggy firmware. ACPI off would mess up windows if you are trying to dual boot but as said above a black screen is usually a problem with the graphics card. Updating the BIOS was a tip given on a Ubuntu forum question I remember from some time last year when someone was faced with this problem.

                        Linux13 When it finally boots, update Solus GNOME via the terminal (It should be listed under "System Tools" in the menu).

                          Appreciate all the effort guys. Havent tried anything after doing the acpi thing. Thought that i should take a break. Wish me luck, although i have tested my ram using memtest86 i am still not satisfied so i am goinf to go test it again and see if it is my hardware or im just unlucky and stupid

                          Linux13 Have you tried to add what I gave you earlier? Maybe this: acpi=off i915.modeset=1.
                          Read about modeset and acp i and try different combinations of entries.

                              pomon this is not really related to acpi error but why do i get a failed to mount /sysroot error.

                                pomon it wont work at all. im going to update my bios and then ill see what i can do.

                                    • [deleted]

                                    • Post #22

                                    Just noticed that oftenly Shitdows 10 dont really shut down but it hibernates. Check that this is not the case. It can be pretty hard to tell...