Updates went just fine on GNOME 👍️

update went well on my side

Went well on my Plasma.

  • Bbrent

    • Post #6

    first time I noticed the flatpak program being updated in a long time. nice.
    good job with the brother printers inclusion as well.
    rebooted, kicked tires, am back at it. thanks team.

    VM and Old Bare metal machine upgraded no problem but for some reason my main machine (2019) with GT 1030 the GLX drivers were replaced Nvidia developers drivers and I got a black screen where the login should have been with lots of weird patterns. Went to TTY checked history to see GLX (565) replaced by developer driver (550) so reversed the change back to GLX driver current and rebooted.

    Can now login normally but no idea why driver was changed. Any ideas?

      Small but nice update without any problems. Thanks

      No problem here with Budgie on ASUS TUF Dash F15 laptop

      • GGwen

        • Post #10

        Went smoothly. GNOME-SC asked me to restart the computer to apply the updates tho 😄

        Everything works fine on my 4 Gnome Devices . I did the last Update with Gnome Software , as a test , and had no Problems . Update my Flatpaks and install some new , works great too . Thx a lot 🙂

        The update with Discover did not run. It reported an error several times. Unfortunately I don't have a screenshot. Under Solus-sc the update went without problems. Should I better uninstall Solus-Sc? Solus KDE version 4.7.

          Exactly this error message came up. I ran sudo eopkg dc. Everything is OK. Thank you very much!

          Updates worked flawlessly on Budgie using the GNOME "Software Center".

          • Bbrent

            • Post #16

            michaelrupprecht Should I better uninstall Solus-Sc? S

            I think you should ride it out with SC...some update in the future Solus will deprecate it then 'disappear' it from your system. I'm sad because out of the 3 GUIS the SC is far superior to the other two. I know the reasons, though.

                banger VM and Old Bare metal machine upgraded no problem but for some reason my main machine (2019) with GT 1030 the GLX drivers were replaced Nvidia developers drivers and I got a black screen where the login should have been with lots of weird patterns. Went to TTY checked history to see GLX (565) replaced by developer driver (550) so reversed the change back to GLX driver current and rebooted.

                Can you post a screenshot or paste of the relevant section of your eopkg history? (the full transaction in which this happened, plus the ones before and after)

                    • MMick

                      • Post #18

                      Here's a doozy. I just updated my laptop running Solus Plasma (i dont know which release since its been a while since i picked up this laptop to play with solus) and I got the lovely and very much not annoying blank screen on login with cursor. Though oddly I can get the hot corner to activate for workspaces, however theyre all blank. So i try some things in the TTY to no avail, but I need to update eopkg to do more, and i get 5 "failed to fetch file" and Hit max retry count when downloading: "https://cdn.getsol.us/repo/shannon/eopkg-index.xml.xz.sha1sum"

                      So for those keeping count, I dont have any means to update, which means i have no means to fix whatever broke after this update. I'm seeing posts about video drivers changing, but I cant scroll up and down in the histories on the TTY console prompt outputs because i dont know how, so I cant go see about the drivers names to switch back.

                      Just for fun i tried again to install the nvidia-glx-driver- current, common, and 32bit. Fails to fetch and git max retry for "https://cdn.getsol.us/repo/shannon/e/egl-wayland/egl-wayland-1.1.17-27.1.x86_64.eopkg" To be fair i'm not sure if my Toshiba laptop even has nvidia drivers.

                      Are the servers down again? I will create a help post if its a more appropriate location for this.

                        brent Thanks for the tip and the quick reply - I will leave Solus-sc as it is.

                          • Bbanger

                            • Post #20
                            • Edited

                            Staudey

                            Operation #172: install
Date: 2025-02-01 01:10

    * nvidia-developer-driver-common 550.40.83-323-1-x86_64 is removed.
    * nvidia-developer-driver 550.40.83-323-1-x86_64 is removed.
    * nvidia-glx-driver-common 565.77-555-1-x86_64 is installed.
    * nvidia-glx-driver 565.77-555-1-x86_64 is installed.

Operation #171: upgrade
Date: 2025-02-01 00:36

    * nvidia-glx-driver-common 565.77-555-1-x86_64 is removed.
    * python3-pyudev 0.24.3-14-1-x86_64 is removed.
    * mesalib is upgraded from 24.3.3-259-1-x86_64 to 24.3.4-260-1-x86_64.
    * glib2 is upgraded from 2.82.4-116-1-x86_64 to 2.82.4-117-1-x86_64.
    * gupnp is upgraded from 1.6.7-21-1-x86_64 to 1.6.7-22-1-x86_64.
    * gupnp-igd is upgraded from 1.6.0-1-1-x86_64 to 1.6.0-2-1-x86_64.
    * dbus is upgraded from 1.14.10-38-1-x86_64 to 1.16.0-39-1-x86_64.
    * dbus-launch is upgraded from 1.14.10-38-1-x86_64 to 1.16.0-39-1-x86_64.
    * nvidia-developer-driver-modaliases is upgraded from 550.40.82-322-1-x86_64 to 550.40.83-323-1-x86_64.
    * mesalib-32bit is upgraded from 24.3.3-259-1-x86_64 to 24.3.4-260-1-x86_64.
    * python-pyudev 0.24.3-1-1-x86_64 is installed.
    * libwacom is upgraded from 2.14.0-41-1-x86_64 to 2.14.0-42-1-x86_64.
    * libinput is upgraded from 1.27.0-49-1-x86_64 to 1.27.1-50-1-x86_64.
    * wine is upgraded from 10.0_rc6-196-1-x86_64 to 10.0-197-1-x86_64.
    * wine-32bit is upgraded from 10.0_rc6-196-1-x86_64 to 10.0-197-1-x86_64.
    * gexiv2 is upgraded from 0.14.3-20-1-x86_64 to 0.14.3-21-1-x86_64.
    * zlib is upgraded from 2.2.2-30-1-x86_64 to 2.2.3-31-1-x86_64.
    * zlib-32bit is upgraded from 2.2.2-30-1-x86_64 to 2.2.3-31-1-x86_64.
    * glib2-32bit is upgraded from 2.82.4-116-1-x86_64 to 2.82.4-117-1-x86_64.
    * libbpf is upgraded from 1.4.7-6-1-x86_64 to 1.5.0-7-1-x86_64.
    * yt-dlp is upgraded from 2025.01.15-237-1-x86_64 to 2025.01.26-238-1-x86_64.
    * fontconfig is upgraded from 2.15.0-49-1-x86_64 to 2.16.0-50-1-x86_64.
    * dbus-32bit is upgraded from 1.14.10-38-1-x86_64 to 1.16.0-39-1-x86_64.
    * nvidia-developer-driver-common 550.40.83-323-1-x86_64 is installed.
    * gvfs is upgraded from 1.56.1-97-1-x86_64 to 1.56.1-98-1-x86_64.
    * glib2-devel is upgraded from 2.82.4-116-1-x86_64 to 2.82.4-117-1-x86_64.
    * zlib-ng is upgraded from 2.2.2-30-1-x86_64 to 2.2.3-31-1-x86_64.
    * imagemagick is upgraded from 7.1.1.36-198-1-x86_64 to 7.1.1.43-199-1-x86_64.
    * aom is upgraded from 3.10.0-24-1-x86_64 to 3.11.0-25-1-x86_64.
    * nvidia-developer-driver is upgraded from 550.40.82-322-1-x86_64 to 550.40.83-323-1-x86_64.
    * fastfetch is upgraded from 2.34.1-44-1-x86_64 to 2.35.0-45-1-x86_64.
    * python-kiwisolver is upgraded from 1.4.5-10-1-x86_64 to 1.4.8-11-1-x86_64.
    * zlib-devel is upgraded from 2.2.2-30-1-x86_64 to 2.2.3-31-1-x86_64.
    * luajit is upgraded from 2.1.1734355927-16-1-x86_64 to 2.1.1736781742-17-1-x86_64.
    * cups-browsed is upgraded from 2.1.0-4-1-x86_64 to 2.1.1-5-1-x86_64.
    * fontconfig-32bit is upgraded from 2.15.0-49-1-x86_64 to 2.16.0-50-1-x86_64.
    * flatpak is upgraded from 1.14.10-79-1-x86_64 to 1.16.0-80-1-x86_64.
    * libuv is upgraded from 1.49.2-19-1-x86_64 to 1.50.0-20-1-x86_64.

Operation #170: repository update
Date: 2025-02-01 00:23

    * Solus repository is updated.

Operation #169: install
Date: 2025-01-31 22:53

* pugixml 1.14-6-1-x86_64 is installed.
    * blosc 1.21.1-5-1-x86_64 is installed.
    * openvdb 9.0.0-16-1-x86_64 is installed.
    * glew 2.2.0-9-1-x86_64 is installed.
    * yaml-cpp 0.7.0-5-1-x86_64 is installed.
    * opencolorio 2.2.1-11-1-x86_64 is installed.
    * ptex 2.4.2-3-1-x86_64 is installed.
    * openimageio 2.5.9.0-45-1-x86_64 is installed.
    * rocm-compilersupport 6.2.4-7-1-x86_64 is installed.
    * numactl 2.0.16-2-1-x86_64 is installed.
    * hsakmt 6.2.4-7-1-x86_64 is installed.
    * rocm-runtime 6.2.4-7-1-x86_64 is installed.
    * rocprofiler-register 6.2.4-1-1-x86_64 is installed.
    * rocm-clr 6.2.4-9-1-x86_64 is installed.
    * rocm-smi 6.2.4-7-1-x86_64 is installed.
    * rocm-smi-devel 6.2.4-7-1-x86_64 is installed.
    * rocm-runtime-devel 6.2.4-7-1-x86_64 is installed.
    * rocm-device-libs 6.2.4-7-1-x86_64 is installed.
    * rocm-device-libs-devel 6.2.4-7-1-x86_64 is installed.
    * rocm-llvm 6.2.4-4-1-x86_64 is installed.
    * rocm-info 6.2.4-7-1-x86_64 is installed.
    * rocm-compilersupport-devel 6.2.4-7-1-x86_64 is installed.
    * rocm-hip 6.2.4-9-1-x86_64 is installed.
    * qt6-designer 6.8.1-24-1-x86_64 is installed.
    * jxrlib 0.2.4-3-1-x86_64 is installed.
    * freeimage 3.18.0-12-1-x86_64 is installed.
    * coin3d 4.0.3-6-1-x86_64 is installed.
    * soqt 1.6.3-4-1-x86_64 is installed.
    * collada-dom 2.5.0-7-1-x86_64 is installed.
    * qt6-networkauth 6.8.1-12-1-x86_64 is installed.
    * libfabric 1.19.0-4-1-x86_64 is installed.
    * geos 3.10.1-5-1-x86_64 is installed.
    * proj 9.5.1-9-1-x86_64 is installed.
    * librttopo 1.1.0-2-1-x86_64 is installed.
    * libspatialite 5.0.1-13-1-x86_64 is installed.
    * qt6-location 6.8.1-8-1-x86_64 is installed.
    * clang-libs 19.1.6-130-1-x86_64 is installed.
    * shiboken6 6.8.0.2-21-1-x86_64 is installed.
    * med-c 4.1.1-4-1-x86_64 is installed.
    * qt6-remoteobjects 6.8.1-12-1-x86_64 is installed.
    * qt6-datavis3d 6.8.1-12-1-x86_64 is installed.
    * qt6-serialbus 6.8.1-10-1-x86_64 is installed.
    * qt6-connectivity 6.8.1-13-1-x86_64 is installed.
    * qt6-3d 6.8.1-13-1-x86_64 is installed.
    * python-pyside6 6.8.0-14-1-x86_64 is installed.
    * openimagedenoise 2.2.2-12-1-x86_64 is installed.
    * gl2ps 1.4.2-8-1-x86_64 is installed.
    * fgt 0.4.10-3-1-x86_64 is installed.
    * cpd 0.5.4-3-1-x86_64 is installed.
    * openscenegraph 3.6.5-28-1-x86_64 is installed.
    * xerces-c 3.2.5-6-1-x86_64 is installed.
    * netcdf-c 4.8.1-7-1-x86_64 is installed.
    * libgeotiff 1.7.1-4-1-x86_64 is installed.
    * gdal 3.8.5-47-1-x86_64 is installed.
    * pdal 2.5.6-8-1-x86_64 is installed.
    * jsoncpp 1.9.5-6-1-x86_64 is installed.
    * rkcommon 1.8.0-3-1-x86_64 is installed.
    * embree 3.14.4-10-1-x86_64 is installed.
    * openvkl 1.1.0-4-1-x86_64 is installed.
    * ospray 2.8.0-3-1-x86_64 is installed.
    * sz 2.1.12-6-1-x86_64 is installed.
    * libpgm 5.3.128-5-1-x86_64 is installed.
    * zeromq 4.3.5-14-1-x86_64 is installed.
    * adios2 2.8.0-10-1-x86_64 is installed.
* libharu 2.4.4-2-1-x86_64 is installed.
    * cgns 4.2.0-5-1-x86_64 is installed.
    * VTK 9.3.0-36-1-x86_64 is installed.
    * opencascade 7.7.2-13-1-x86_64 is installed.
    * flann 1.9.1-6-1-x86_64 is installed.
    * pcl 1.14.1-7-1-x86_64 is installed.
    * python-pivy 0.6.9-8-1-x86_64 is installed.
    * freecad 1.0.0-19-1-x86_64 is installed.

Operation #168: upgrade
Date: 2025-01-30 06:21

    * k3b is upgraded from 24.12.1-91-1-x86_64 to 24.12.1-92-1-x86_64.

                                • pomon

                                  • Post #21

                                  Mick
                                  I suggest opening a new thread, as many people here may not notice it. Please include the following in the new thread:
                                  Do you even have internet ping google.com -s1000 -c5.
                                  What graphics card driver inxi -G.
                                  Are there any nvidia packages installed eopkg li | grep nvidia.