brent Thats a wild question about the only things on the board hardware would the
power supply,clock,and antenna circuits bluetooth and 2.4g wifi share the same antenna circuits.
everything else is pretty much seperate.
Its kinda one those 50/50 things
If your 2.4g wifi and bluetooth died it could be the antenna circuit on the pci board
If 5g,2.4,bluetooth died it could be power supply problem on pci board
If 5g,2.4,Bluetooth died could be the clock circuit on pci board.
You basically have 3chips on 1 big chip 5g,2.4g,bluetooth so communication to those 3 are seperate.
Clear as mud?
Just a way of making things smaller and more economic
My point earlier to him was
1 it appears harware is ok
2bluetoothctl (doesnt work)
3blueman manager/applet (dont work)
4 So its got to be something common to all those since terminal,and applet talk different to the bluetooth
kinda went around and right back to firmware it could be something else but I would not know what.
(Not sure I know everything common)
Just tidbit of info when you turn bluetooth off or sleep or any those things you are putting those chips
in a low power mode (Not turning them off like light switch otherwise you couldnt turn them back on)
And like harvey pointed out early on about those modes,sometimes when those chips are put into
low power mode they are a B**ch to wake up again if not designed properly.
I had him do the bios thing to see if it was switching alright to low power mode = (off) and it was.
I am done sorry got long winded.