I think this was set in the last ISO, but you will want to make sure Linux Steam Integration is off. Otherwise at the very least I expect Proton will not work. Sorry if that is not the problem, and good luck.

Have you tried switch between Xorg and Wayland to see if it makes a different.
I still uses Xorg as wayland have a habit to make graphical glitches ingame.

I was trying to run the game with these options
__NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia %command%
It didn't help. Running Steam with __GLX_VENDOR_LIBRARY_NAME=nvidia gave the same results.

Thanks for your replies.

If you are using the nvidia-glx-driver-current which you probably are unless you selected the beta driver (Currently both the same version) then make sure you have also installed nvidia-glx-driver-32bit

    Here's my nvidia-smi output

    Strange thing. It says gpu is "Off" Should it be like this?
    My inxi -Ga

    Graphics:
    Device-1: Intel HD Graphics 620 vendor: Lenovo driver: i915 v: kernel
    arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1
    empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:5916
    class-ID: 0300
    Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Lenovo driver: nvidia
    v: 550.78 non-free: 545.xx+ status: current (as of 2024-04; EOL2026-12-xx)
    arch: Maxwell code: GMxxx process: TSMC 28nm built: 2014-2019 pcie: gen: 1
    speed: 2.5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.0
    chip-ID: 10de:134d class-ID: 0302
    Device-3: Chicony EasyCamera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:3 chip-ID: 04f2:b5d8
    class-ID: 0e02 serial: 0001
    Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 23.2.6
    compositor: gnome-shell v: 46.1 driver: gpu: i915 display-ID: 0
    Monitor-1: eDP-1 model: BOE Display 0x0687 built: 2015 res: 1920x1080
    dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
    ratio: 16:9 modes: 1920x1080
    API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: iris
    surfaceless: drv: nvidia wayland: drv: iris x11: drv: iris
    inactive: device-2
    API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 24.0.6 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel HD Graphics 620 (KBL GT2)
    device-ID: 8086:5916 memory: 11.21 GiB unified: yes display-ID: :0.0
    !<

      decembre-dhiver We had users over at Zorin OS wit the same problem. It was solved by:

      sudo prime-select nvidia
      sudo reboot
      I'm not sure if it works as well in Solus OS as I haven't combo GPUs in my computers.

          I had a similiar problem on my AMD CPU / Nvidia GPU Notebook. No game started. There's for sure a better solution but what works for me is renaming /usr/share/vulkan/icd.d/radeon_icd.x86_64.json to /usr/share/vulkan/icd.d/radeon_icd.x86_64.json.disabled

          In your case it would be /usr/share/vulkan/icd.d/intel_icd.x86_64.json I guess.
          But it's risky!

          I think a better solution is using environment variables, see switching: https://wiki.archlinux.org/title/Vulkan

          Probably starting steam or the game with VK_DRIVER_FILES=/usr/share/vulkan/icd.d/10_nvidia.json would do the trick, haven't tested, but you might try that first.

            So, I've found how to prime-run and started prime-run steam
            Here are some errors
            steamwebhelper.sh[7389]: Starting steamwebhelper under bootstrap sniper steam runtime at /home/decembre/.local/share/Steam/ubuntu12_64/steam-runtime-sniper
            CAppInfoCacheReadFromDiskThread took 124 milliseconds to initialize
            Steam Runtime Launch Service: starting steam-runtime-launcher-service
            Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 7485
            bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
            Vulkan missing requested extension 'VK_KHR_surface'.
            Vulkan missing requested extension 'VK_KHR_xlib_surface'.
            BInit - Unable to initialize Vulkan!
            Vulkan missing requested extension 'VK_KHR_surface'.
            Vulkan missing requested extension 'VK_KHR_xlib_surface'.
            BInit - Unable to initialize Vulkan!
            Tried to run Dead Cells gave the same erros:
            /bin/sh\0-c\0/home/decembre/.local/share/Steam/ubuntu12_32/reaper SteamLaunch AppId=588650 -- /home/decembre/.local/share/Steam/ubuntu12_32/steam-launch-wrapper -- '/home/decembre/.local/share/Steam/steamapps/common/Dead Cells/deadcells.sh'\0
            chdir "/home/decembre/.local/share/Steam/steamapps/common/Dead Cells"
            ERROR: ld.so: object '/home/decembre/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
            ERROR: ld.so: object '/home/decembre/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
            ERROR: ld.so: object '/home/decembre/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
            ERROR: ld.so: object '/home/decembre/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
            ERROR: ld.so: object '/home/decembre/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
            ** ERROR ** Missing library libbsd.so.0
            ** ERROR ** Missing library libbsd.so.0
            ** ERROR ** Missing library libbsd.so.0
            ** ERROR ** Missing library libbsd.so.0
            ** ERROR ** Missing library libbsd.so.0
            src/module.c(321) : FATAL ERROR : Failed to load library sdl.hdll
            And nvidia-smi, while running prime-run steam:

            Everything seems to be working, but still nothing happens (and nothing's working at the same time) =(

            It says error with vulcan. Could it be that it's a vulcan issue? I'm a bit baffled about the issue though.

            Yes, me too. And it's far beyond my humble technical knowledge, so I don't know how and what I shoul debug and what information I can and should provide. Wating for some weekly update miracle in this case 🙂
            Maybe, I might install an older driver, 470, and check this... However I strongly wanna be "on the edge" 🙄

            All right, I've completely removed nvidia drivers and tried to launch games. So Dead Cells - same errors, but Cuphead works fine 0_o, even though there are still some errors like in my original post...

              decembre-dhiver Dead cells has a native version and cuphead has not. So Cuphead probably runs through DXVK (with Vulkan) while Deadcells uses OpenGL I guess. Maybe you can try to run it with Proton as well and see wether it starts working.

              Edit: I own Dead Cells too and I installed it to compare with your output. It also didn't start anymore. I installed libbsd and now it starts.

                  EDIT AH sorry was a differt problem x_x

                  Hi All,
                  The freeze issue which I observed locally on my setup has a different stack which has been reported here.
                  I have tried repro since then on couple of systems for few days where I tried updating packages followed by multiple reboots/logouts but not observed freeze issue.

                  Would appreciate if anyone has reliable repro steps for the freeze issue.
                  Also, for isolation purpose, can someone please try below steps and confirm if solves the issue.

                  Add"zswap.enabled=0" and “numa=off” to the kernel parameter
                  Changed the nvidia to nvidia-open-dkms
                  https://forums.developer.nvidia.com/t/series-550-freezes-laptop/284772/106

                  kaktuspalme Edit: I own Dead Cells too and I installed it to compare with your output. It also didn't start anymore. I installed libbsd and now it starts.

                  Thanks for that bit of info! I added libbsd as a rundep to the Solus steam package here

                  Also thanks to @decembre-dhiver for the initial logs that showed the issue!

                    I'm a newbie , but I install steam from flathub and works perfectly
                    flatpak install flathub com.valvesoftware.Steam com.valvesoftware.Steam.CompatibilityTool.Proton com.valvesoftware.Steam.Utility.protontricks

                    Very appreciate the help of every of you! Even though pretty much nothing has worked out, I'm still feeling support and I'm not alone with the problem =)

                    As for @kaktuspalme and @Staudey I didn't try your tips yet, I can only test those later.

                    Thank you, everyone!