Live USB stuck on start up

Shurfire

So I've been trying to install solus for the better part of a day now. When I try to boot off the live usb it hangs up on ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready.

I'm not sure what the problem is. I've tried 3 USBs and I made sure secure boot is turned off. I was able to install Pop_OS on the system, but I'm not trying to use Pop. I tried endeavorOs to see if there was an issue and I also can not install that.

brent

Shurfire If you used 3 usb's with the same result...then did you make them exactly as Solus advised (https://getsol.us/articles/installation/preparing-to-install/en/).
But if I didn't know any better that looks like an ethernet/router error on your end.
Can't say exactly--those are just my troubleshooting guesses, nothing more

Shurfire

brent I did. I believe I figured out the problem. When I tried it with a friend's Nvidia card it was fine and lightdm worked and no problem. When I try with my 6700xt, then lightdm won't work. PopOS and endeavorOs work so I'm guessing it has something to do with driver issues.

I couldn't get Solus to work even if I installed it with the Nvidia GPU, installed the AMD drivers and then swapped out the GPU. Would you have any tips on getting it to work? I'm sure I'm missing something small.

brent

Shurfire I got snookered by that etho error I guess.
I matched my intel to the correct nvdia package (390) by reading/using the forum search. I know nothing about AMD and Nvidia but I know there are plenty of threads here. Good luck.