- Edited
synth-ruiner Still like it but would change a few little things on it and maybe get a smaller keyboard
synth-ruiner Still like it but would change a few little things on it and maybe get a smaller keyboard
Justin at least i dont have the worst cable spaghetti
Scotty-Trees It's a great case. The monitor is the Samsung Space Monitor, 32" (SR75).
saitam It's a custom WASD V3 mechanical keyboard. They are made in my hometown so I picked it up directly from their office!
Justin Looks like we might have the same Logitech distortion-free bass speakers! I've had mine since like 2008 and still working great.
Girtablulu That's a surprisingly clean setup for a Plasma guy, thanks for sharing
tomocafe Now you got me curious what your system specs are in that Nzxt case! I do see some Asus component there
Lucien_Lachance thanks! I am just looking for the new desk, This one looks good and has minimum height 65 cm (25 5/8 "). Do you recommend it? Any cons?
Scotty-Trees To be honest I cleaned it a bit and got rid off all the coffee cup stains on the table
Solarmass its fine, i dont really have much to compare it with though. its got some kind of net underneath where u can stuff cables and stuff like that. im not sure i would sit on it, not towards the edges anyway, its got a metal frame but it doesent extend all the way to the edges of the wooden plate and iirc the screws were quite small so i think maybe the wooden plate would pop off if i sat on the edge. in short, typical ikea quality, but id recommend it yeah.
edit: the metal legs and frame is super sturdy though, could probably hold up a car
edit2: if your intention is to put a desktop computer case between the tables legs it would be uncomfortably tight.
edit 3: pic
Scotty-Trees I built it in Summer 2017.
Here's inxi
dump:
Machine:
Type: Desktop Mobo: ASUSTeK model: PRIME X370-PRO v: Rev X.0x
serial: <root required> UEFI: American Megatrends v: 0805 date: 06/20/2017
CPU:
Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP
L2 cache: 4096 KiB
Speed: 1550 MHz min/max: 1550/3400 MHz Core speeds (MHz): 1: 1550 2: 1550
3: 1550 4: 1550 5: 1550 6: 1550 7: 1550 8: 1550 9: 1550 10: 1550 11: 1550
12: 1550 13: 1550 14: 1550 15: 1550 16: 1550
Graphics:
Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] driver: nvidia v: 440.64
Display: x11 server: X.Org 1.20.7 driver: nvidia
resolution: 3840x2160~60Hz
OpenGL: renderer: GeForce GTX 1060 6GB/PCIe/SSE2 v: 4.6.0 NVIDIA 440.64
Audio:
Device-1: NVIDIA GP106 High Definition Audio driver: snd_hda_intel
Device-2: AMD Family 17h HD Audio driver: snd_hda_intel
Device-3: Logitech C922 Pro Stream Webcam type: USB
driver: snd-usb-audio,uvcvideo
Device-4: Blue Microphones Yeti Nano type: USB
driver: hid-generic,snd-usb-audio,usbhid
Sound Server: ALSA v: k4.9.217-156.lts
Network:
Device-1: Intel I211 Gigabit Network driver: igb
IF: enp38s0 state: up speed: 1000 Mbps duplex: full mac: 60:45:cb:9e:17:f4
IF-ID-1: docker0 state: down mac: 02:42:aa:0d:09:27
Drives:
Local Storage: total: 465.76 GiB used: 123.50 GiB (26.5%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 960 EVO 500GB
size: 465.76 GiB
CPU is an AMD Ryzen 1700 (OC @ 3.4 GHz)
Graphics card is an ASUS DUAL GTX 1060 OC 6 GB
Memory is Corsair Vengeance LPX (DDR4-3200, 2x 16GB, OC @ 3400 MHz)
Disk is a Samsung NVMe SSD 960 EVO M.2 (500 GB)
Motherboard is an ASUS Prime X370-Pro
Power supply is an EVGA Supernova 650 G3
Lucien_Lachance It used to be far worse. That's considered clean-ish.
Scotty-Trees The irony that you call them distortion-free, I have recently been getting distortion through them, they're not quite as old as yours but have been through hell having me as an owner so I'm not surprised. Time for a new set soon.
Alecoco the link is in the post: https://discuss.getsol.us/d/8-show-your-solus/779
synth-ruiner You use Linux for djing? Which software do you use?
kaktuspalme afraid not, that laptop is currently dual-booting Void and Windows 8.1, with Windows being used (almost) exclusively for Traktor.
last time I checked, Traktor ran perfectly fine under Wine but there was no way of getting my Kontrol S2 working with it. I did quite a lot of poking around to see if anyone else had got it working, but couldn't find anything. that was about a year ago though, so maybe it's time to investigate again.
Girtablulu Wow, now THAT'S a battlestation!
Here is my setup where I work from home
And this is my battlestation aka Unraid-NAS-VM-PASSTHROUGH-Gaming-Setup in our "Family Cave" .
But I have to admin that I divided my Unraid NAS & Gaming Setup to a dedicated Unraid NAS Server and Gaming PC Setup again.
my new curved 3440x1440 Asus ProArt PA34VC
lovely monitor
The table glass my computer asus PC beautiful. I have wacom tablet I work a art solus wallpaper that me it. I love video game PS4 and PC gaming best solus
I got a new laptop! XPS 13 9300 Developer Edition. It came with Ubuntu 18.04 pre-loaded with some Dell garbage, but a fresh Solus Budgie 4.1 install fixed that right up! With the ISO version of the kernel and linux-firmware, my Wi-Fi driver wasn't working out of the box, so I had to find a USB-C to ethernet adapter to get a wired connection and update packages. After that, it's been smooth sailing!