CorvusRuber Thanks again, but I guess I wasn't clear too. Maybe hijacking this thread was not a good idea ... 😂

You should install as usual from usb

Well, I can't, that's the point.

I'm trying to boot from usb, but I only get the blinking cursor (lightdm refuses to start). I tried installing the nvidia-glx drivers (with and without nomodeset), tried the nvidia-beta drivers, still nothing.
Your argument about the 5.x kernel must be it, as I was able to boot Ubuntu Budgie with 5.x kernel from usb (at least with the low graphics mode, so I could in theory install it. But I want Solus 😉)

Is there any way to boot the current solus ISO from usb, but with a 5.x kernel?

      chiltepin Well, I can't, that's the point.

      Curses. foiled again 😅

      chiltepin Is there any way to boot the current solus ISO from usb, but with a 5.x kernel?

      I don't think so.... I fear you'll have to wait for a ISO refresh.

            CorvusRuber I don't think so.... I fear you'll have to wait for a ISO refresh.

            Bummer. That makes me sad ☚ī¸
            Guess that will be a while.

            Anyways, thank you for your time!

              Boot ISO from USB
              Switch to TTY when it fails (Ctrl Alt F1-6, any will do)
              Login

              sudo eopkg it nvidia-glx-driver-current
sudo systemctl restart lightdm

                Justin Thanks, but I tried that already, also with the beta drivers. Lightdm still refuses to start.

                    Justin Not a Quadro in my case, sorry for thread-hijacking 😧 Thought that my case is pretty similar...

                    It's a Nvidia RTX 2070 Super, specifically a Gigabyte RTX 2070 Super Aorus Gaming OC

                        chiltepin Interesting as Zeb has a 2080Ti and he was able to install the drivers, then restart lightdm and get the GUI.

                        Edit: Maybe the super cards are different and not quite supported by the drivers yet. You tried the beta but did you try the developer drivers? I think they're even more experimental.

                            Justin Thank you, I didn't know about the dev drivers. But it has the same effect, no working GUI with eopkg it nvidia-developer-driver-current.

                            There is a nvidia-persistence service, which seems to be the main problem. Journal says, the service is unable to write to /dev/nvidia*, thus fails to start. I tried to set the group via chown, even tried chmod 777 with no success.

                            If it's interesting for you, I can upload some photos I made from the journal.

                              8 months later

                              Any updates on this? I am also having the same issue, with not way to get past the terminal into the gui to install Solus. I am on the X570 platform with a Ryzen 3900x and a GTX 1080, other various threads with this issue claim you can fix it by installing nvidia drivers, but as @chiltepin has mentioned that has no effect, and neither does booting with nomodeset. This is an ongoing problem with Solus that needs to be addressed as it is unusable currently. I can provide logs or whatever devs need if anyone can take a look at this.

                                Moudoux
                                Well this thread is over 8 months old. Solus released the 4.1 iso 25th January 2020.

                                It should not be an issue with the latest ISO. I too have a X570 with a Ryzen 3900X only I have a GTX 1060 instead, no issues. So are you using the latest ISO?

                                    Yes, latest iso and same issues as in this thread Harvey

                                      7 months later

                                      It is also weird, my solid live usb crashes 1st time due to nouveau error, second time I booted it it booted fine without nomodeset and I was able to install it, but now I am getting the nouveau crash every time I boot both the OS and the live USB.
                                      nomodeset boots to the cursor, but Alt+f2 doesn't work, it won't open console, it stays at black screen

                                        NKSHV Why don't you install the nvidia driver instead of using nouveau?

                                            I found a solution: when it gives you the initial boot menu with solus and reboot to firmware, press e to edit solus entry, delete "quiet splash" and replace it with "noveau.nomodeset=0" and press enter

                                            NKSHV What gpu do you have? Can you get to the tty now with nomodeset? Then you can install it using the terminal.
                                            Propably "sudo eopkg it nvidia-glx-driver-current" should do the trick, if your gpu is new enough and you use the current kernel.

                                                kaktuspalme I have gtx 1650. As I said I can't access TTY with just nomodeset, but with "nouveau.nomodeset=0" the system boots properly. However now I've encountered this issue. https://discuss.getsol.us/d/3365-nvidia-glx-driver-common-problem
                                                I can't use "sudo eopkg it nvidia-glx-driver-current" as it shows "could not fetch destination file from "https://mirrors.rit.edu/solus/packages/shannon/n/nvidia-glx-driver/nvidia-glx-driver-common-440.44-329-1-x86_64.eopkg": [Errno 14] HTTPS Error 404 - Not Found
                                                If the nvidia driver is in the database but missing from the repo, something is definitely wrong with solus drivers database and it might be why solus can't boot for so many people with nvidia gpus

                                                    NKSHV If the nvidia driver is in the database but missing from the repo, something is definitely wrong with solus drivers database and it might be why solus can't boot for so many people with nvidia gpus

                                                    It's not found because it doesn't exist anymore, we trim older packages. You need to make sure you have a fully up-to-date system (run sudo eopkg up).