gorzka I want to shange from Siducton to Solus, butmy Problen is the the Printer and Scanner. The Software is not the Problem , but I need this printer Support. The priner is OK, but the scanner is my problem. Any solutions?
brent Staudey multitasking sorry! gorzka https://www.linuxquestions.org/questions/linux-mint-84/samsung-m2070fw-printer-driver-in-linux-mint-17-a-4175531967/ scroll down to last response in that thread. the person started with the extracted targz then listed the terminal commands for install. a starting place at least
brent I see you did request that Solus package the drivers a while back on devtracker and no one replied to you. That might be because it was a targz that Samsung offered. A targz will (should) work on Solus. You just need someone to walk you thru this. I do not compile much at all so I can't help there. Somewhere in this package is the answer. I opened a couple folders have not found any instructions or readme... extract it and see if you can. That would be a start. The scanner ppd is in the folder.... Meanwhile look online later to see if anyone did this (2675) on another distro so you have a basic idea then maybe someone here can take you the rest of the way. I may do some reading about it later. edit: typo
brent https://askubuntu.com/questions/741000/ubuntu-14-04-and-samsung-printer-driver-usr-lib-cups-filter-rastertospl-not on this thead someone with a 2675 and Ubu went to a website that offered samsung unified drivers (SULD) and had success. but it's a DEB-only solution. Someone did a SULD package request as devtracker with no response as I recall. EDIT: I did extract that targz. still see no readme but there is no suld either. you need to find a way to compile this and you'll get what you want/need. I plugged this into DDG ("M2675FN install linux") and am periodically reading while under my vehicle. My fuel pump is new but I got no pressure at the fuel rail and she's still starved and wont start. Then it will start. Why so intermittent?? Fuel filter outside the tank is new, the fuel pump inside the tank is new. Can hear it prime when the key is turned. I replaced fuel pressure regulator myself. So this is a matter of pushing gas from from to back. I have to get an ohmeter down there. Clogged lines? Old raggedly lines coming apart? Fuel odor and gas leak when cranking. All under the engine. Not coming from the rail, the injectors, or the regulator but where the line bends out of sight. Oooops wrong forum🙁
