Hello ive been trying to create a usb to boot from ive tried the method stated and gone through 2 usb's that now cant be reset due to corruption and im wondering if theres another method.
my ways ive tried were, using rufus , using ISO mode and DD image mode
Can you link the tutorial you use? I've gone through the same method as well but this doesn't happen to me.
https://getsol.us/articles/installation/preparing-to-install/en/ windows install usb
What do you mean by can't reset due to corruption ?
kyrios what I ment was after I created the usb windows could not find the usb unless I used the Disk partition tool. which is shown on the first post where most of the drive is unallocated
con19998 That's because writing the image to the USB changes it's filesystem, once you are finished installing Solus you can format it to whatever you want (FAT or NTFS) so it'll be readable in Windows.
Have you tried to actually boot into the USB you've made?
Yes I get kernel failed to load and the rest of the system is timing out as we speak
I've tried Rufus in the past once and it didn't produce this kind of stuff. I would suggest to try balenaEtcher: https://www.balena.io/etcher/
okay thank you ill try that in a moment and will let you know
I got it working thank you the budgie edition had 300mb missing on download but the MATE edition works fine
con19998 You're welcome! Enjoy using Solus!
Copyright © 2015-2020 Solus Project. The Solus logo is Copyright © 2016-2020 Solus Project.